・Outputs the analog voltage according to the actuator stroke position
・A single switch can discriminate between max. 3 position points. 　
　Repeatability: ±20 mV (Converted stroke ±0.1 mm)
　Discriminable dimensional difference: 0.2 mm
　∗ The value is in the high-resolution range. The converted stroke value
　　varies depending on the actuator.
　∗ For air grippers, this is the value for one side of the finger. When it is
　　converted to the dimension of the workpiece to be gripped, the value is
　　doubled.
・Detection position display and setting away from the actuator are
　possible.
・Analog voltage output (1 to 5 V)
　・Can also be used with the analog auto switch single unit
・Reduced setting labor
　・No need to fine-tune the switch mounting position
　・Easy adjustment even in narrow places and on moving parts
・Improved productivity
　· Gripper fully open R gripping R gripping failure detection
　· Minimized lead wire disconnection risk
· Preventive maintenance
　· Display of gripper finger wear
　· Visualization of daily inspections (Origin position/ Gripping position)